NEC Univerge SV8100 Programming Manual - page 206
Issue 11.0
UNIVERGE SV8100
2 - 164
Program 14 : Trunk, Basic Setup
Description
Use Program 14-11 : ID Setup for IP Trunk to set the ID of each IP Trunk. This
program refers to incoming and outgoing IP Trunk calls. The ID is sent on an outgoing
IP Trunk call. This program is used only for H.323.
Conditions
This Data is called IP trunk outgoing call, or IP trunk incoming call.
This ID is notified at IP trunk outgoing call.
It is not notified when ID is 0.
Incoming Call arrives to the trunk port of the same ID as ID notified from the
partner system.
Feature Cross Reference
IP Trunk – H.323
Program 14 : Trunk, Basic Setup
14-11 : ID Setup for IP Trunk
Level:
IN
Input Data
Trunk Port Number
001~200
Item
No.
Item
Input Data
Default
01
IP Trunk ID
0~65535
(0 = No setting)
0