NEC Univerge SV8100 Programming Manual - Signal
Other manuals for Univerge SV8100:
Service Information Bulletin, Description, User Manual, User Manual, Quick Start User Manual, User Manual, Information Sheet, User Manual, System Specifications, Configuration Manual, User Manual, User Manual, Quick Reference Manual, Quick Reference Manual, Programming Manual, General Description Manual, User Manual, System Maintenance Manual, User Manual, Features And Specifications Manual, Quick Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, User Manual, Installation Manual, Installation Manual, Reference Manual, User Manual, System Hardware Manual, Reference sheet, Reference Sheet, Quick Start & Reference Manual, System Configuration Manual, User Manual, User Manual, Programming Manual, Administrator's Manual, User Manual, Quick Reference Manual, Quick Reference Manual, User Manual, User Manual, System Hardware Manual, Installation Manual, Condensed User's Manual, Installation Manual, Quick Reference Manual, System Hardware Manual, User Manual, Installation Manual, Administration Manual, Quick Reference Manual, System Hardware Manual, Features & Specifications Manual, Adminstrators Manual, System Hardware Manual, Applications, System Hardware Manual, User Manual, Installation Manual, Reference Sheet
of
966
Issue 11.0
UNIVERGE SV8100
2 - 544
Program 45 : Voice Mail Integration
Description
Use Program 45-05 : Voice Mail Send Protocol Signal Without Additional Digits
to send trunk number and/or station number information if integrating to Voice Mail
when PRG 45-04-XX is left blank and 45-01-15 is set to Program.
Conditions
None
Feature Cross Reference
None
Program 45 : Voice Mail Integration
45-05 : Voice Mail Send Protocol
Signal
Without Additional
Digits
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
Remote Log-On Internal
0 = Off
1 = On
0
02
Direct Log-On
0 = Off
1 = On
0
03
Transfer Message/QVM
0 = Off
1 = On
0
04
Forward-All
0 = Off
1 = On
0
05
Forward-Busy
0 = Off
1 = On
0
06
Forward RNA
0 = Off
1 = On
0
07
Remote Log-On
0 = Off
1 = On
0
08
Conversation Recording
0 = Off
1 = On
0
09
Clear Down String
0 = Off
1 = On
0