NEC Univerge SV8100 Programming Manual - page 261
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 219
Description
Use Program 15-24 : Registration of Standard SIP Terminal to register data in the
standard SIP terminal where Register is not used.
(This program requires software revision 4.00 or higher.)
Conditions
None
Feature Cross Reference
None
Program 15 : Extension, Basic Setup
15-24 : Registration of Standard SIP Terminal
Level:
IN
Item
No.
Item
Input Data
Default
01
Using IP Address
IP Address of the standard SIP
terminal that is used as the SIP
extension. When Program 15-24-03 is
set to 1, this Program cannot be
changed from 0.0.0.0 (except using
PCProgramming).
0.0.0.0~255.255.255.255
0.0.0.0
02
Call Procedure Port
Call procedure port of the standard
SIP terminal that is used as SIP
extension.
0~65535
5060
03
Registration Setting when
REGISTER isn’t used
Enables or disables the Registration
method. An error will occur if Program
15-24-01 is 0.0.0.0 and this Program
is set to 1 (except using
PCProgramming).
0 = Disable
1 = Enable
0