NEC Univerge SV8100 Programming Manual - page 221
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 179
53
Aspire Model -C Phone
Operation Mode
When this setting is assign “1”,
Aspire Model-C phone is working
with Model-B (Type-A) with the
following key layout;
CALL1 = Answer
CALL2 = Feature
DND = Conf
HOLD = Hold
DIAL = Directory
LND = Redial
MIC = Mic
SPK = Speaker
MSG = Message
FLASH = Recall
CONF = Transfer
0 = Original Operation Mode
1 = CTI Special Operation
Mode
0
54
Menu Operation Mode
0 = Automatic Close
1 = Manual Close
0
57
Caller Log on Busy
0 = Off
1 = On
1
15-02-34
58
Display Mode of Incoming Trunk
0 = Caller ID
1 = Memo Information
0
13-04-08
13-04-09
13-04-10
69
Microphone Operation on
Handsfree
Select the microphone status when
starting Handsfree mode.
0 = No change for MIC status
1 = Start from MIC enabled
2 = Start from MIC muted
0
70
MIC Key Operation
Control whether the microphone
key is enabled (0) or disabled (1).
0 = Enabled
1 = Disabled
0
71
Disable Softkey
When set to 1 (On), disable Softkey
and cursor key operation at the
terminal.
0 = Off
1 = On
0
Item
No.
Item
Input Data
Default
Related
Program