NEC Univerge SV8100 Programming Manual - page 894
Other manuals for Univerge SV8100:
Service Information Bulletin, Description, User Manual, User Manual, Quick Start User Manual, User Manual, Information Sheet, User Manual, System Specifications, Configuration Manual, User Manual, User Manual, Quick Reference Manual, Quick Reference Manual, Programming Manual, General Description Manual, User Manual, System Maintenance Manual, User Manual, Features And Specifications Manual, Quick Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, Features And Specifications Manual, User Manual, Installation Manual, Installation Manual, Reference Manual, User Manual, System Hardware Manual, Reference sheet, Reference Sheet, Quick Start & Reference Manual, System Configuration Manual, User Manual, User Manual, Programming Manual, Administrator's Manual, User Manual, Quick Reference Manual, Quick Reference Manual, User Manual, User Manual, System Hardware Manual, Installation Manual, Condensed User's Manual, Installation Manual, Quick Reference Manual, System Hardware Manual, User Manual, Installation Manual, Administration Manual, Quick Reference Manual, System Hardware Manual, Features & Specifications Manual, Adminstrators Manual, System Hardware Manual, Applications, System Hardware Manual, User Manual, Installation Manual, Reference Sheet
of
966
Issue 11.0
UNIVERGE SV8100
2 - 852
Program 90 : Maintenance Program
Description
Use Program 90-13 : System Information Output to define the output port to be
used as the system information output. The baud rate for the COM port should be set
in Program 10-21-02.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-13 : System Information Output
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
Output Port Type
Indicate the type of connection used to print the
system information.
0 = No Setting
4 = CTA/CTU
5 = USB
0
02
CTA Output Destination Extension Number
Up to eight digits
No Setting
04
Output Destination System ID
0~50
0
05
Output Command
Dial 1+ press Transfer
(Press Transfer to cancel.)
–