NEC Univerge SV8100 Programming Manual - page 82
Issue 11.0
UNIVERGE SV8100
2 - 40
Program 10 : System Configuration Setup
Description
Use Program 10-24 : Daylight Savings Setup to set the options for daylight
savings. As the telephone system is used globally, these settings define when the
system should automatically adjust for daylight savings as it applies to the region in
which the system is installed.
Program 10 : System Configuration Setup
10-24 : Daylight Savings Setup
Level:
IN
Input Data
Item
No.
Item
Input Data
Default
01
Daylight Savings Mode
Enable/Disable the system ability to adjust the
time for daylight savings/standard time.
0 = Disable
1 = Enable
1
02
Time for Daylight Savings
Enter the time of day when the system should
adjust for daylight savings time.
00:00~23:59
02:00
03
Start Month (Summer Time)
Enter the month when the system should
adjust the time for daylight savings time
(01~12).
1~12
(Jan = 1, 2 = Feb, etc.)
3
04
Start of Week
Enter the week of the month when the system
should adjust the time for daylight savings
time. The week will start on the day listed in
10-24-05.
0 = Last Week of Month
0~5
2
05
Start of Week Day
Enter the day of the week when the system
should adjust the time for daylight savings time
(01 = Sunday, 02 = Monday, etc.).
1~7
(Sun = 1, Mon = 2, etc.)
1
06
End of Month
Enter the month when the system should
adjust the time for standard time (01~12).
1~12
(Jan = 1, 2 = Feb, etc.)
11
07
End of Week
Enter the week of the month when the system
should adjust the time for standard time.
The week will start on the Day listed in
10-24-08.
0 = Last Week of Month
0~5
1