NEC Univerge SV8100 Programming Manual - Program 31 : Paging Setup
UNIVERGE SV8100
Issue 11.0
SV8100 Programming Manual
2 - 427
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to
Internal Paging Groups (i.e., Page Zones). The setting in this program also
determines if the Internal Page Group can receive Internal All Call Paging. The
system can have up to 64 paging groups. An extension can be in only one Internal
Paging Group.
Conditions
None
Feature Cross Reference
Paging, Internal
Program 31 : Paging Setup
31-02 : Internal Paging Group Assignment
Level:
IN
Input Data
Extension Number
Maximum eight digits
Item
No.
Item
Input Data
Default
01
Internal Paging Group Number
Assign extensions to Internal Paging
Groups (i.e., Page Zones). The system
allows up to 64 Internal Paging Groups. An
extension can be in only one Internal
Paging Group.
0~64
(0 = No Setting)
0 for IP Station
1 for TDM Station
02
Internal All Call Paging Receiving
Allow/Prevent All Call Internal Paging for
each extension. If allowed, extension can
place and receive All Call Internal Paging
announcements. If prevented, extensions
can make only (not receive) All Call
Internal Paging announcements. If
combined, Paging zones should be
restricted as well, change the internal page
zone group in Program 31-07-01 to 0.
0 = Off
1 = On
0