Canon imagePRESS C1 Service Manual - page 1001
Chapter 16
16-104
50-RG
Display an offset value of color registration (R-G) at BOOK mode / 50% reading.
Adjustment method
- When you executed 'RAM clear' for the reader controller PCB or replaced the reader controller
PCB, enter the value indicated in the service label.
1
Setting range: -256 to 256
[Factory setting value: Factory adjustment value / Value after RAM clear: 0]
When you changed the setting value for this item, write down the changed value in the service
label.
50-GB
Display an offset value of color registration (G-B) at BOOK mode / 50% reading.
Adjustment method
- When you executed 'RAM clear' for the reader controller PCB or replaced the reader controller
PCB, enter the value indicated in the service label.
1
Setting range: -256 to 256
[Factory setting value: Factory adjustment value / Value after RAM clear: 0]
When you changed the setting value for this item, write down the changed value in the service
label.
100-RG
Display an offset value of color registration (R-G) at BOOK mode / 100% reading.
Adjustment method
- When you executed 'RAM clear' for the reader controller PCB or replaced the reader controller
PCB, enter the value indicated in the service label.
1
Setting range: -256 to 256
[Factory setting value: Factory adjustment value / Value after RAM clear: 0]
When you changed the setting value for this item, write down the changed value in the service
label.
100-GB
Display an offset value of color registration (G-B) at BOOK mode / 100% reading.
Adjustment method
- When you executed 'RAM clear' for the reader controller PCB or replaced the reader controller
PCB, enter the value indicated in the service label.
1
Setting range: -256 to 256
[Factory setting value: Factory adjustment value / Value after RAM clear: 0]
When you changed the setting value for this item, write down the changed value in the service
label.
50DF-RG
Display an offset value of color registration (R-G) at ADF mode / 50% reading.
Adjustment method
- When you executed 'RAM clear' for the reader controller PCB or replaced the reader controller
PCB, enter the value indicated in the service label.
1
Setting range: -256 to 256
[Factory setting value: Factory adjustment value / Value after RAM clear: 0]
When you changed the setting value for this item, write down the changed value in the service
label.
50DF-GB
Display an offset value of color registration (G-B) at ADF mode / 50% reading.
Adjustment method
- When you executed 'RAM clear' for the reader controller PCB or replaced the reader controller
PCB, enter the value indicated in the service label.
1
Setting range: -256 to 256
[Factory setting value: Factory adjustment value / Value after RAM clear: 0]
When you changed the setting value for this item, write down the changed value in the service
label.
100DF-RG
Display an offset value of color registration (R-G) at ADF mode / 100% reading.
Adjustment method
- When you executed 'RAM clear' for the reader controller PCB or replaced the reader controller
PCB, enter the value indicated in the service label.
1
Setting range: -256 to 256
[Factory setting value: Factory adjustment value / Value after RAM clear: 0]
When you changed the setting value for this item, write down the changed value in the service
label.
100DF-GB
Display an offset value of color registration (G-B) at ADF mode / 100% reading.
Adjustment method
- When you executed 'RAM clear' for the reader controller PCB or replaced the reader controller
PCB, enter the value indicated in the service label.
1
Setting range: -256 to 256
[Factory setting value: Factory adjustment value / Value after RAM clear: 0]
When you changed the setting value for this item, write down the changed value in the service
label.
COPIER > ADJUST > CCD
Subheading
Contents
Level