Canon imagePRESS C1 Service Manual - page 178
Chapter 2
2-84
2.4.2 Installation Procedure (imagePRSS C7000 series)
0016-9173
Color Image Reader-H1
1. Installation procedure
1) Open the sub station front right cover [1] and the sub station front left cov-
er [2].
F-2-305
2) Detach the sub station upper front cover [1].
- 3 screws [2]
F-2-306
3) Detach the sub station upper right cover [1].
- 3 screws [2]
F-2-307
4) Detach the reader retaining plate [1]. (The reader retaining plate detached
is not used.)
- 2 screws [2]
F-2-308
5) Lift the front side of the sub station upper left cover [1] and then, pull it to
remove. (The sub station upper left cover detached is not used.)
F-2-309
6) Detach the sub station left upper cover [1].
- 9 screws [2]
F-2-310
7) Detach the upper rear face cover 1 [1] and upper rear face cover 2 [2(Up-
per rear face cover 1 is not used, when optional ADF is installed.) (Upper
rear face cover 2 is not used after it is detached.)
Points to Note When Turning Off the Main Power of the Host
Machine
Be sure to turn off the main power in the following order to protect hard disk
of the host machine.
1) Press the power switch on control panel for 3 sec or more.
2) Follow the instruction on the shutdown sequence screen (the main power
switch will go off automatically).
3) Turn off the breaker.
4) Disconnect the power plug.
[1]
[2]
[1]
[2]
[1]
[2]
[2]
[1]
[1]
[1]
[2]
[2]