Canon imagePRESS C1 Service Manual - page 532
Chapter 8
8-67
- 2 edge saddles [3]
- 1 harness [4]
- 3 screws [5]
F-8-147
7) Remove the decurler sponge roller (upper) unit [1].
7-1) Pull out the corner [A] area of the decurler sponge roller unit to the po-
sition of [B], and then remove it in the upper direction of the arrow [C].
- 1 spring [2]
F-8-148
8) Remove the decurler sponge roller (upper) [1].
- 2 E-rings [2]
- 2 washers [3]
- 2 bearings [4]
F-8-149
8.10.11 Decurler Adjustment Roller (Lower)
8.10.11.1 Preparation for Removing the Decurler Sponge
Roller (lower)
0013-9777
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the decurler. (page 8-65)Reference [Removing the Decurler]
8.10.11.2 Removing the Decurler Sponge Roller (lower)
0013-9779
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door [1] in the direction of the arrow.
F-8-150
2) Pull out the handle [2] of the decurler (upper) unit [1] toward you to re-
lease the lock.
F-8-151
3) Detach the decurler lower inside cover [1].
- 4 screws [2]
F-8-152
4) Detach the lower roller guide plate [1].
- 2 screws [2]
F-8-153
5) Remove the decurler sponge roller (lower) [1] .
- 2 E-rings [2]
- 2 washers [3]
- 2 bearings [4]
[3]
[4]
[5]
[1]
[2]
[2]
[5]
[1]
[2]
[A]
[B]
[C]
[2]
[2]
[3]
[3]
[4]
[4]
[1]
[1]
[1]
[2]
[2]
[1]
[1]
[2]
[2]