Canon imagePRESS C1 Service Manual - page 401
Chapter 7
7-52
F-7-67
[1] Developing cylinder
DC-CON: DC controller
HVT: High voltage PCB
7.8 Toner Container
7.8.1 Outline
0012-9293
imagePRESS C1 P / imagePRESS C1
The machine has four toner bottles (Y, M, C, Bk). Each toner bottle consists of toner and a stirring plate.
The hopper unit consists of the toner supply screw, toner feeder screw, and toner level sensor.
When the toner bottle is set to the main unit, toner is transported to the hopper unit and sent to the developing assembly on a timely basis.
The following seven types of electric loads are used in the toner supply route.
- Motor: 2 types (cartridge motor, hopper motor)
- Sensor: 3 types (toner supply volume sensor, toner replacement cover sensor, toner level sensor)
- Clutch: 1 type (developing clutch)
- Switch: 1 type (toner bottle presence detection switch)
DC-CON
DEV_CL_A
C_ON
DEV_CL_DC_ON
DEV_DC_CONT
J1187
J3201
J3211
HVT5
[1]
AC+DC