Canon imagePRESS C1 Service Manual - page 319
Chapter 5
5-40
F-5-190
5) Detach the reader rear cover [1].
- 1 connector [2]
- 5 screws [3]
F-5-191
6) Detach the reader upper rear cover [1].
- 1 screw [2]
- 1 emboss [3]
F-5-192
7) For the subsequent steps, see step 4 to 7 in 'Removing the Scanner Motor
' (in the case of imagePRESS C1 Series).
5.4.12 Original Sensor
5.4.12.1 Preparation for Removing the Original Size
Sensor (imagePRESS C1 Series/imagePRESS C7000
Series)
0013-9949
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Remove the copyboard glass. (page 5-16)Reference [Removing the
Copyboard Glass]
5.4.12.2 Removing the Original Size Sensor
(imagePRESS C1 Series)
0013-9950
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
1) Detach the reader upper right cover [1].
- 2 cover rubbers [2]
- 2 screws [3]
F-5-193
2) Detach the reader right cover [1].
- 3 cover rubbers [2]
- 3 screws [3]
F-5-194
3) Detach the CCD unit cover [1].
- 9 screws [2] (3 screws at the right side of the reader)
F-5-195
F-5-196
Points to Note When Attaching the CCD Unit Cover
When attaching the CCD unit cover, be sure to hook the 2 claws [1] on the 2
[1]
[2]
[1]
[2]
[3]
[2]
[3]
[1]
[1]
[2]
[3]
[2]
[3]
[1]
[2]
[2]
[2]
[3]
[3]
[3]
[1]
[2]
[2]
[2]
[2]