Canon imagePRESS C1 Service Manual - page 709
Chapter 12
12-11
Perform basically dry-wipe with lint-free paper.
*1: 18,000-sheets at H/H condition (High temperature/High Humidity condition).
*2: The pre-transfer charging duct seal indicates the seal attached at the side of the pre-transfer charging assembly.
*3: Make sure to clean the secondary transfer downstream guide with lint-free paper moistened with alcohol. Also, in order to prevent soil to the secondary transfer
outer roller, the guide should be cleaned after removing it from the secondary transfer outer roller unit.
*4: For cleaning the collecting area of the secondary transfer outer roller, make sure to dispose the toner at the collecting area.
*5: 50K for imagePRESS C1+
Places to attach filters
F-12-5
Places to attach the parts in image formation system that require cleaning
[1]
[6]
[2]
[3]
[4]
[9]
[7]
[8]
[5]
[11]
[12]
[10]