Canon imagePRESS C1 Service Manual - page 1086
Chapter 16
16-189
DATE-DSP
Switch the date display.
2
Setting range:
0: YYMM/DD
1: DD/MM'YY
2: MM/DD/YY
MB-CCV
Restrict the use of the control card for mailbox.
2
Setting range
0: Do not restrict the use.
1: Restrict the use.
Standard value
0
TRY-STP
Set a mode not to perform printing when the tray is full.
2
Setting range
0: Normal mode (Stop printing when the finisher tray is full.)
1: Stop printing only by detecting the height.
Standard value
0
MF-LG-ST
Set a key for the long length paper mode.
2
Setting range
0: Normal
1: Display the long length key in the corresponding mode screen.
Standard value
0
CNT-DISP
Set whether or not to display a serial number when pressing the counter check key.
2
Setting range
0: Display a serial number.
1: Do not display a serial number.
Standard value
0
OP-SZ-DT
Set ON/OFF of the document size detection function while the copyboard is open.
2
Setting range
0: Do not perform the document size detection while the copyboard is open.
- The document size must be manually entered in the control panel.
1: Perform the document size detection while the copyboard is open.
- Use this mode when you need to perform the document size detection automatically even when
you cannot close the copyboard to make copies of a thick book, etc.
- Detection is performed when the start key is pressed.
Standard value
0
Remarks
When SIZE-DET is set to 0, the document size detection is not performed even when OP-SZ-DT
is set to 1.
NW-SCAN
Set whether or not to permit the network scan function.
2
0: Do not permit the network scan function.
1: Permit the network scan function.
Standard value
0
HDCR-DSP
Switch the display/operation of HDD clear mode in the user mode.
2
Setting range
0: Do not perform clear.
1: Perform clear once with "0".
2: Perform clear once with random data.
3: Perform clear three times with random data.
Standard value
1
MEMO: function for HDD initialization
This is the function to clear the data on HDD completely by overwriting the 0 (null) data and
random data to file data area at the moment of deleting files logically (timing for deleting the
administrative information data) in HDD.
COPIER>OPTION>USER
Subheading Contents
Level