Canon imagePRESS C1 Service Manual - page 1101
Chapter 16
16-204
16.6.1.3 COPIER List P (BODY)
0014-3801
imagePRESS C1 P
1. BODY
T-16-177
ST-PSPCU
Display the installation status of PS, PCL, and UFR in transfer invalidation.
Display the combined options of PS, PCL, and UFR.
2
Setting range
0: Unavailable (not installed)
1: Available (installed)
Standard value
0
TR-PSPCU
Obtain a transfer license key of PS, PCL, and UFR in transfer invalidation.
Obtain a transfer license key to use the combined options of PS, PCL, and UFR by other MFP
machine.
2
Standard value
Transfer license key: 24 digits
ST-LXUFR
Display the installation status of LIPS LX (UFR II for overseas) in transfer invalidation.
2
Setting range
0: Unavailable (not installed)
1: Available (installed)
Standard value
0
TR-LXUFR
Obtain a transfer license key of LIPS LX (UFR II for overseas) in transfer invalidation.
Obtain a transfer license key to use LIPS LX (UFR II for overseas) by other MFP machine.
2
Standard value
Transfer license key: 24 digits
COPIER>OPTION>BODY
Subheading Contents
Level
PO-CNT
Set ON/OFF of the electric potential control function.
1
Setting range
0: OFF
1: ON
Standard value
1
MODEL-SZ
Switch the fixed and variable display and ADF document size detection.
1
Setting range
0: AB (6R5E)
1: INCH (5R4E)
2: A (3R3E)
3: AB/INCH (6R5E)
Standard value
0: AB(6R5E) For Japan
1: INCH(5R4E) For North, Central and South America
2: A(3R3E) For Europe
3: AB/INCH(6R5E) For Asia, Oceania and South America
FIX-TEMP
Switch the plain paper down sequence table.
1
Setting range
0: Default
1: Fixing is prioritized
2: Productivity is prioritized
Standard value
0
The setting value becomes valid after the main power switch is turned OFF/ON.
Usage:
Select '0' when giving preference to the image quality (fixing), '2' when giving preference to the
speed (productivity).
COPIER>OPTION>LCNS-TR
Subheading Contents
Level