Canon imagePRESS C1 Service Manual - page 597
Chapter 9
9-60
- Apply grease (Molykote HP-300; CK-8012) to the inner diameter area [1]
and the outer diameter area [2] of the bushings for about 20 mg, so that to
make white coating in assigned areas.
Purpose: to avoid abnormal sound
F-9-184
- Make sure to wipe off the excessive grease because the grease adheres to
the both edges [1] of the external heat roller when mounting the greased
bushes to the external heat roller.
F-9-185
9.7.28 Lower Separation Claw
9.7.28.1 Preparation for Removing the Lower Separation
Plate
0014-0217
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you.
9.7.28.2 Removing the Lower Separation Plate
0014-0218
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the external delivery cover [1].
F-9-186
2) Open the internal delivery cover [1].
F-9-187
3) Detach the internal delivery roller cover [1].
- 2 screws [2]
F-9-188
4) Remove the lower separation plate unit [1] in the direction of the arrow.
- 1 screw [2]
- 1 mount [3]
F-9-189
5) Remove the flag unit [1].
- 1 screw [2]
F-9-190
6) Detach the lower separation plate [1].
- 6 screws [2]
- 6 separation claws [3]
[1]
[2]
[1]
[1]
[1]
[1]
[2]
[3]
[2]
[1]
[1]
[2]