Canon imagePRESS C1 Service Manual - page 1163
Chapter 16
16-266
16.6.1.6 COPIER List (subheadings under USER)
0020-7016
imagePRESS C1+ (Printer) / imagePRESS C1+
2. USER
T-16-196
TOP-H-2
Write start position adjustment on 2nd side in main scanning direction (106 to 150g)
To activate the write start position adjustment on 2nd side of large paper (single sheet image) in
main scanning direction
2
Setting range: -10 to +10
Factory setting value: 0 (0.1mm unit)
TOP-V-3
Write start position adjustment on 2nd side in sub scanning direction (151 to 209g)
To activate the write start position adjustment on 2nd side of large paper (single sheet image) in
sub scanning direction
2
Setting range: -10 to +10
Factory setting value: 0 (0.1mm unit)
TOP-V-4
Write start position adjustment on 2nd side variable magnification in sub scanning direction (210
to 256g)
To activate the write start position adjustment on 2nd side of large paper (single sheet image) in
sub scanning direction
2
Setting range: -10 to +10
Factory setting value: 0 (0.1mm unit)
TOP-H-4
Write start position adjustment on 2nd side in main scanning direction (210 to 256g)
To activate the write start position adjustment on 2nd side of large paper (single sheet image) in
main scanning direction
2
Setting range: -10 to +10
Factory setting value: 0 (0.1mm unit)
TOP-H-3
Write start position adjustment on 2nd side in main scanning direction (151 to 209g)
To activate the write start position adjustment on 2nd side of large paper (single sheet image) in
main scanning direction
2
Setting range: -10 to +10
Factory setting value: 0 (0.1mm unit)
COPIER > OPTION > USER
Subheading Contents
Level
COPY-LIM
Change the upper limit value of the number of copies.
1
Setting range: 1 to 9999 copies
Standard value: 9999
SLEEP
Set ON/OFF of the sleep function.
1
Setting range
0: OFF
1: ON
Standard value: 1
The sleep function is set by the timer setting in the user mode.
WEB-DISP
Set whether or not to display the message "web is almost empty" in the user screen.
1
Setting range
0: Do not display the message.
1: Display the message.
Standard value
1: Display the message.
[Remarks]
A) Message on the UI
Display a warning message. (default)
Whether or not to display the warning message can be set by this mode.
B) Display in the service mode
The message is always displayed regardless of the value specified for this mode.
COUNTER 1
Use it to set soft counter 1 for the counter status verification screen.
1
101: Total 1
Fixed to 1, which is a factory setting value / a value after RAM clear is executed. This value
cannot be changed.
COUNTER 2
Use it to set soft counter 2 for the counter status verification screen.
1
Setting range: 0 to 999
Standard value: 108
COUNTER 3
Use it to set soft counter 3 for the counter status verification screen.
1
Setting range: 0 to 999
Standard value: 232
COUNTER 4
Use it to set soft counter 4 for the counter status verification screen.
1
Setting range: 0 to 999
Standard value: 324
COUNTER 5
Use it to set soft counter 5 for the counter status verification screen.
1
Setting range: 0 to 999
Standard value: 0
COUNTER 6
Use it to set soft counter 6 for the counter status verification screen.
1
Setting range: 0 to 999
Standard value: 0
COPIER > OPTION > BODY
Subheading Contents
Level