Canon imagePRESS C1 Service Manual - page 539
Chapter 9
9-2
9.1.2 Major Components (Section)
0012-0961
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
F-9-1
Construction
Characteristics/Function/Method
Remarks
[1]
Fixing roller
Fixing of toner onto the sheet
improved gross evenness
80 mm dia
[2]
Fixing belt
width: 348+/-2mm
[3]
outside heating roller
prevents the temperature decline at continuous printing
36 mm dia
[4]
Separation roller
separates of paper from the fixing roller
21 mm dia
[5]
Steering roller
Corrects the belt displacement
[6]
Inlet roller
Controls the temperature of the fixing belt
20 mm dia
[7]
Oil applying roller
Decreases the friction of sliding surfaces inside the belt
includes silicon oil; 10 mm dia
[8]
Collecting roller
Collects the toner on the fixing roller temporarily
[9]
Pressure pad
Forms an appropriate fixing nip
[10]
Outside heating cleaning roller
Cleans the outside heating roller
[11]
Cleaning web
Cleans the fixing roller via collecting roller
[12]
Web roller
Cleans the toner attached on the collecting roller
[13]
Fixing inlet guide
Determines the advancing angle into the fixing nip area (prevents end plate
spring, crease, and friction)
[14]
Fixing main heater (H1)
Halogen heater: 400W (100V/120V), 437W (230V)
main heater/sub heater; integrated type
Fixing main heater (H2)
Halogen heater: 400W (100V/120V), 437W (230V)
[15]
Inlet heater (H3)
Halogen heater: 400W (100V/120V), 437W (230V)
[16]
Outside heater (H4)
Halogen heater: 400W (100V/120V), 437W (230V)
[17]
Fixing refresh roller
Refreshes the surface of the fixing roller
[18]
Upper separation guide
Guides paper to the inside delivery area
[19]
Lower separation claw
Separates paper from the fixing belt
[1]
[6]
[5]
[7]
[2]
[9]
[4]
[8]
[3]
[13]
[15]
[12]
[18]
[19]
[11]
[16]
[17]
[14]
[10]