Canon imagePRESS C1 Service Manual - page 158
Chapter 2
2-64
F-2-206
3) Check the folliwing setting
Service mode: COPIER > OPTION > BODY > CLCONFIG
Make sure that this setting is set to "0".
2.2.25 Turning the Main Power ON
0020-7011
imagePRESS C1+ (Printer) / imagePRESS C1+
1) Connect one side of the power cable to the inlet of the host machine.
2) Connect the 2 power plugs (1 at the back, 1 at the side) of the host machine
to the separate power system outlets and turn ON the main power [1].
F-2-207
3) Check the folliwing setting.
Service mode: COPIER > OPTION > BODY > CLCONFIG
Make sure that this setting is set to "0".
2.2.26 Setting of Environmental Switch
0020-7012
imagePRESS C1+ (Printer) / imagePRESS C1+
1) Connect the power cable with the inlet on the main body.
2) Connect the 2 power plugs (1 for the backside, and 1 for the left side of
the machine) of the machine to different power outlets, and turn on the
main power [1].
- Be sure to remove the packing material in the cassette before turning ON
the main power switch.
- Korean is not included among the languages for the control panel with this
model at the time of shipment.
Thus, be sure to follow the instructions below to install RUI and Language
that support Korean when installing the host machine.
1) Turn ON the main power of the host machine.
2) Using Service Support Tool, install RUI and Language that support
Korean.
3) Select 'KR' in Service Mode (for setting location: COPIER > OPTION >
BODY > CONFIG).
4) Select 'KOREAN' for selection of language on user screen: Additional
Functions > Common Settings > Language Switch > Select a language.
ON
OFF
[1]
Before turning the main power on, be sure to remove the packing materials.
ON
OFF
[1]