Canon imagePRESS C1 Service Manual - page 712
Chapter 12
12-14
The value noted in the foregoing is the estimated value and it may be changed according to experience data.
- Clean the toner receptacle [1] on the hopper unit with a lint-free paper.
Be sure to keep the toner receptacle away from any foreign particle at this time.
F-12-9
Clean the supply mouth [1] with a lint-free paper.
Be sure to keep the supply mouth away from any foreign particle at this time.
F-12-10
12.4 Cleaning
12.4.1 Cleaning for secondary transfer rear guide
0012-1986
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
1) Open the front cover.
2) Pull out the fixing feeder assembly.
3) Clean ribs one by one, from left to right by lint-free paper soaked with alcohol solution, as the arrow in the following chart.
- Do not implement dry wiping because rib may take charge.
- The rib of the secondary transfer rear guide is close to the static charge eliminator [3]. Do not wipe in adverse direction because the static charge eliminator
may be hit and bent.
[1]
[1]