Canon imagePRESS C1 Service Manual - page 584
Chapter 9
9-47
F-9-104
2) Open the internal delivery cover [1].
F-9-105
3) Detach the fixing front cover [1].
- 3 screws [2]
F-9-106
4) Detach the fixing upper cover [1].
- 2 stepped screws [2]
- 1 screw [3]
F-9-107
5) Remove the web roller unit [1].
- 2 screws [2]
F-9-108
6) Pull out the external pressure roller assembly [1] in the direction of the ar-
row.
- 2 screws [2]
F-9-109
7) Shift the refresh roller unit [1] in the direction shown by [A], and slide it
out in the direction shown by [B].
- 1 E-ring [2]
F-9-110
Be sure not to touch the refresh roller. Hold the gear or the bearing.
Points to Note when Attaching the Refresh Roller Unit
- Be sure to attach the refresh roller after removing the protection sheet. The
protection sheet cannot be removed after attaching the refresh roller.
- Be sure to spread a sheet [3] beneath the fixing roller so as not to damage
it. After attaching the refresh roller unit, draw the sheet [3] out.
8) Remove the refresh roller [1].
- 2 E-rings [2]
- 1 gear [3]
- 3 bearings [4]
- 1 spring [5]
- 1 spacer [6]
- 2 bushings [7]
[1]
[1]
[2]
[1]
[1]
[2]
[3]
[1]
[2]
[2]
[2]
[1]
[1]
[3]
[2]
[A]
[B]