Canon imagePRESS C1 Service Manual - page 887
Chapter 15
15-24
15.4 Jam Codes
15.4.1 Jam Code (Printer Unit)
0012-4835
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
1. Type of Jam
T-15-8
2. Jam Code (Printer Unit)
T-15-9
Indicates that memory image area is full.
Delete the error documents or unnecessary documents to increase available
memory.
Indicates that machine failed to save the document as the document number
within the specified Box exceeds 1500.
Delete the document in the specified Box.
# 852
Indicates that an error occurred as the main power switch was turned OFF during
job execution.
Check if the main power switch is ON, and then if required, repeat the job.
# 853
Indicates that the machine failed to execute jobs including printing huge amount
of pages by printer due to insufficient resources.
Decrease the volume of document to print or execute the job again when there is
no other booked print job.
Indicates that the machine failed to execute job during transmission of print data
from PC to the machine due to cancellation from the printer driver.
Repeat the job again.
Indicates that not all the reception data from the host were spooled due to
insufficient reception data spool area when the spool function is activated.
Deactivate the spool function and then transmit the job again.
Indicates that the reception data volume exceeded the upper limit reception data
processing.
Repeat the print after all the job is completed. If that is not effective, check the
transmission data.
Indicates that secure jobs of which amount is more than available at one time were
introduced.
Execute or delete the secure job accumulated in the Host machine and then
execute the job again.
#854
Indicates that the machine failed to deliver the device information from devices
other than same model group as the setting in 'System Administration Settings
(Initial Setup/Registration) > Device Information Delivery Settings > Reception
Limit by Delivery Group' is enabled.
Deactivate the 'reception limit of the delivery group' and then repeat the device
information transmission.
#855
Indicates that the machine failed to deliver the device information as it included
a language not available in the external phone (destination)
Contact the Service.
#856
Indicates that the job was cancelled due to insufficient hard disk area for
temporarily stored data.
Contact the system administrator.
# 995
Indicates that the job was cancelled due to security error.
Contact the system administrator.
Code
Type of Jam
01xx
Delay jam
02xx
Stationary jam
0Axx
Residual jam
0B00
Door open jam
Code
Type of Sensor
Sensor No.
Remarks
xx01
Cassette 1 pickup sensor
PS28
xx02
Cassette 2 pickup sensor
PS34
xx03
Cassette 3 pickup sensor
PS41
Cause
Remedy