Canon imagePRESS C1 Service Manual - page 157
Chapter 2
2-63
F-2-203
5) Check the folliwing setting
Service mode: COPIER > OPTION > BODY > CLCONFIG
Make sure that this setting is set to "0".
2.2.23 Turning the Main Power ON
0020-5078
imagePRESS C1+ (Printer) / imagePRESS C1+
1) Connect the 2 power plugs (1 for the backside, and 1 for the left side of
the machine) of the machine to different power outlets, and turn on the
main power [1].
F-2-204
F-2-205
2) Check the sett of 4-color/5-color model.
Service mode: COPIER > OPTION > BODY > CLCONFIG
- In case of 4-color model, make sure that this setting is set to "1".
- In case of 5-color model, make sure that this setting is set to "0".
2.2.24 Turning the Main Power ON
0020-7010
imagePRESS C1+ (Printer) / imagePRESS C1+
1) Connect the power cable with the inlet on the main body.
2) Connect the 2 power plugs (1 for the backside, and 1 for the left side of
the machine) of the machine to different power outlets, and turn on the
main power [1].
Before turning the main power on, be sure to remove the packing materials.
ON
OFF
[1]
100V
2.9A
100V
15A
120V
2.6A
120V
15.1A
230V
1.3A
230V
9.2A
MAIN
SUB
Before turning the main power on, be sure to remove the packing materials.
Use the correct power code to mach the location/area of installation. Make
sure not to leave unused power code at the site.
ON
OFF
[1]