Canon imagePRESS C1 Service Manual - page 309
Manual is about: imagePRESS C1 Series
of
1265
Chapter 5
5-30
F-5-125
7) Detach the upper right cover [1] for the copyboard cover.
- 2 screws [2]
- 2 cover rubbers [3]
F-5-126
8) Detach the reader right cover [1].
- 3 screws [2]
F-5-127
(Only in case of ADF)
9) Detach the reader upper right cover[1].
- 2 screws [2]
F-5-128
(The subsequent steps are applied only for ADF.)
10) Detach the CCD unit cover [1].
- 9 screws [2] (3 screws at the right side of the reader)
F-5-129
F-5-130
11) Remove the inverter PCB [1].
- 1 flat cable [2]
[1]
[2]
[1]
[2]
[3]
[2]
[3]
[1]
[2]
[2]
[2]
Point to Note When Attaching CCD Unit
Cover
When attaching the CCD unit cover, be sure to hook
the 2 claws [1] on the 2 claws [2] and then fix it with
screws.
[1]
[2]
[1]
[2]
[2]
[2]
[1]
[2]
[1]