Canon imagePRESS C1 Service Manual - page 530
Manual is about: imagePRESS C1 Series
of
1265
Chapter 8
8-65
F-8-133
Points to Note When Mounting the Fixing/Feeding Unit
Make sure to fit the 4 pins [2] to the 4 cut-offs [1].
F-8-134
8.10.9 Buffer Decurler
8.10.9.1 Removing the Decurler
0014-0570
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Detach the panel mount cover [1] attached to the upper left cover (rear).
- 1 screw [2]
F-8-135
2) Disconnect the grounding wire [1], and detach the harness support plate
[2].
- 2 screws [3]
F-8-136
3) Remove the harness support plate [2] from the reuse band [1].
F-8-137
4) Disconnect the 5 connectors [1].
F-8-138
5) Open the decurler front cover [1].
F-8-139
6) Remove the 2 screws [1].
[1]
[1]
[1]
[2]
[2]
[1]
[1]
[2]
[1]
[2]
[3]
[1]
[2]
[1]
[1]