Canon imagePRESS C1 Service Manual - page 1073
Chapter 16
16-176
16.6.1.2 COPIER List (subheadings under USER)
0014-3800
imagePRESS C1
2. USER
T-16-160
FAN-TM1
Operation time change of fans for primary charging series
Change the operation time of fans for primary charging series at last rotation.
2
Setting range: 0 to 55 (1 scale: 1 min)
Standard value: 55
Supplement: This service mode applies to the following three fans.
- Primary exhaust fan (FM2)
- Left exhaust fan (FM16)
- Primary exhaust assist fan (FM18)
Make sure to set the setting value to 15 min or more.
This item applies to the upgraded device (DCON Ver11.03 or later, Cont Ver24.04 or later)
COPIER>OPTION>USER
Subheading Contents
Level
COPY-LIM
Change the upper limit value of the number of copies.
1
Setting range
1 to 9999 copies
Standard value
9999
SLEEP
Set ON/OFF of the sleep function.
1
Setting range
0: OFF
1: ON
Standard value
1
The sleep function is set by the timer setting in the user mode.
WEB-DISP
Set whether or not to display the message "web is almost empty" in the user screen.
1
Setting range
0: Do not display the message.
1: Display the message.
Standard value
1: Display the message.
[Remarks]
A) Message on the UI
Display a warning message. (default)
Whether or not to display the warning message can be set by this mode.
B) Display in the service mode
The message is always displayed regardless of the value specified for this mode.
COUNTER 1
Use it to set soft counter 1 for the counter status verification screen.
1
101: Total 1
Fixed to 1, which is a factory setting value / a value after RAM clear is executed. This value
cannot be changed.
COUNTER 2
Use it to set soft counter 2 for the counter status verification screen.
1
Setting range
0 to 999
Standard value
108
COUNTER 3
Use it to set soft counter 3 for the counter status verification screen.
1
Setting range
0 to 999
Standard value
232
COUNTER 4
Use it to set soft counter 4 for the counter status verification screen.
1
Setting range
0 to 999
Standard value
324
COPIER>OPTION>BODY
Subheading Contents
Level