Canon imagePRESS C1 Service Manual - page 453
Chapter 7
7-104
F-7-224
2) Shift the primary transfer roller [1] in the direction of the arrow [A] and
then [B], and remove the roller.
F-7-225
7.14.29 Secondary Transfer External Roller
7.14.29.1 Preparation for Removing the Secondary
Transfer Outside Roller
0013-9769
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front cover.
2) Pull out the fixing/feeding unit toward the front.
3) Remove the secondary transfer outside roller unit. (page 7-101)Refer-
ence [Removing the Secondary Transfer Outer Roller Unit]
4) Remove the secondary transfer outside roller sub-unit. (page 7-102)Ref-
erence [Removing the Secondary Transfer Outside Roller Sub-Unit]
7.14.29.2 Removing the Secondary Transfer Outside
Roller
0013-9770
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the secondary transfer outside roller [1].
- 3 E-rings [2]
- 2 bearings [3]
- 1 curler [4]
- 1 gear [5]
F-7-226
7.14.30 Secondary Transfer Internal Roller
7.14.30.1 Preparation for Removing the Secondary
Transfer Inside Roller
0013-9717
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front cover.
2) Detach the process unit cover.
3) Lift the hopper unit.
4) Remove the primary charging assembly. (page 7-86)Reference [Re-
moving the Primary Corona Assembly]
5) Remove the pre-transfer charging assembly. (page 7-88)Reference [Re-
moving the pre-transfer corona assembly]
6) Remove the drum unit. (page 7-89)Reference [Removing the Drum
Unit]
7) Pull out the fixing/feeding unit.
8) Remove the intermediate transfer unit. (page 7-100)Reference [Remov-
ing the Intermediate Transfer Unit]
9) Remove the ITB cleaning unit. (page 7-99)Reference [Removing the
ITB Cleaning Unit]
10) Remove the ITB. (page 7-102)Reference [Removing the ITB]
7.14.30.2 Removing the Secondary Transfer Inside Roller
0013-9718
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Release 2 tension roller pressure arms [1] by pressing the knob [2], and
shift the arm in the direction of the arrow.
F-7-227
2) Remove the secondary transfer inside roller [1].
Cover the roller section of the secondary transfer inner roller with paper, to
avoid touching it directly.
- 2 E-rings [2]
- 1 bearing [3]
[1]
[1]
[A]
[B]
[1]
[2]
[2]
[2]
[3]
[3]
[4]
[5]
[1]
[1]
[2]
[2]