Canon imagePRESS C1 Service Manual - page 425
Chapter 7
7-76
F-7-97
[1] Drum cleaning unit exhaust outlet
[2] Waste toner tube
[3] Waste toner screw
[4] Developing assembly exhaust outlet
[5] ITB cleaning unit exhaust outlet
[6] Waste toner bottle
[7] Waste toner
M3: Developing motor
DC-CON: DC controller
7.11.2 Waste Toner Full Detection
0013-8026
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
This machine performs the following two detections to detect the waste toner level collected into the waste toner bottle.
- Detection by the magnetic sensor
- Detection by the waste toner counter
The DC controller refers to these detection results for each print at power ON and opening/closing the front door. When the waste toner level exceeds the specified
value, the DC controller sends two kinds of messages (full with waste toner alarm, full with waste toner) to the main controller.
The following are the display messages and the waste toner level.
T-7-17
Message
Description
Waste toner level
By which tool
Waste toner full alarm 'Full with waste toner'
80%
Magnetic sensor
Waste toner full
'Service error display' *1
100%
Waste toner counter
M3
DC-CON
J1173
[1]
[2]
[3]
[4]
[5]
[6]
[7]