Canon imagePRESS C1 Service Manual - page 570
Chapter 9
9-33
E197
Fixing unit communication error
0002
The communication error occurs 10 times in succession during the process
of the communication initialization sequence between the DC controller
and the fixing delivery unit.
0003
The communication error occurs 10 times in succession after the
completion of the initialization sequence between the DC controller and the
fixing delivery unit.
0004
Indicates that 24V ON notification of the fixing delivery block is not
detected via the communication between the DC controller and the fixing
delivery unit when starting the initial multiple rotation of the Bk drum.
E805
Fixing belt cooling fan
000E
Indicates the detection of the lock signal of the fixing belt cooling fan 1.
000F
Indicates the detection of the lock signal of the fixing belt cooling fan 2.
0010
Indicates the detection of the lock signal of the fixing belt cooling fan 3.
0011
Indicates the detection of the lock signal of the fixing belt cooling fan 4.
E842
Outside heating roller separation
error
0009
Indicates that the condition, the outside heating roller keeps contact with the
fixing roller for 300 msec while the fixing roller has been stopped, is
detected in terms of the hardware.
Outside heating roller
engagement error
0001
Indicates that the engagement is not detected by HP sensor within 5 sec
from the start of HP detection.
0011
Indicates the logical displacement of HP sensor at the time of operation.
0101
Indicates that the outside heating roller is not at the predetermined position
when completing the operation.
Fixing belt engagement error
0002
Indicates that the engagement is not detected by the belt HP sensor within
5 sec from the start of HP detection.
0012
Indicates the logical displacement of HP sensor at the time of operation.
0102
Indicates that the fixing belt is not at the predetermined position when
completing the operation.
Cleaning belt engagement error
0003
Indicates that the engagement is not detected by the cleaning belt HP sensor
within 5 sec from the start of HP detection.
0013
Indicates the logical displacement of HP sensor at the time of operation.
0103
Indicates that the cleaning belt is not at the predetermined position when
completing the operation.
E-code Main cause
Detail code Detail
Recovery
method