Canon imagePRESS C1 Service Manual - page 1178
Chapter 16
16-281
SLP-SLCT
Use it to set the switch designed to switch between existing network-based applications.
2
A certain packet needs to be received as a condition for the machine to recover from sleep mode
via network. Because the existing network system applications (e.g., Net Spot Accountant, image
WARE) do not send such packet, the machine fails to recover via network if it's shifted to sleep
mode 3.
When setting '1', the machine able to recover from sleep mode via network because it does not
shift to sleep mode 3 (1wsleep), resulting the trade-off with the increase of consuming electricity.
settings
0: do not use (default); 1: use
MEMO:
This is not used at normal servicing.
PS-MODE
Selecting compatibility mode when using PS (image processing, print specification)
2
This is the mode to simulate REPLACE to hold compatibility for image processing and print
specification.
settings
0: no use of PS compatibility mode (default)
1: image processing equivalent of iR2220/2800/3300 series (compatibility with existing
machines)
2: image processing equivalent of iR105 (compatibility with existing machine)
3: backup
4: landscape image and portrait image can be duplexed printing using Canon controller. This is
the compatible mode with non-Canon controller.
5 through 65535: backup
When the setting value is '1', the output will be equivalent to that of iR2200 / 2800 / 3300 series.
Whereas when the setting value is '2', the output will be equivalent to that of iR105 series.
CNCT-RLZ
Set whether or not to use the Connection Serialize Function.
2
Function: Switch the use of the Connection Serialize Function.
[Remarks]
- Connection Serialize Function
This function is provided to guarantee the job grouping function of imageWARE Output Manager
Select Edition V1.0. Since an iR-series MFP machine provides multiple connections, you can
make a setting to prohibit reception of multiple connections at a device so that the job grouping
function is guaranteed. In other words, when you make a setting to prohibit reception of multiple
connections at a device, the device does not receive job data from a connection until reception of
job data from another connection is completed. (--> This prevents jobs to queue in different
order.)
- "Connection" refers to the connection established among multiple hosts (PCs) via network.
- Job Grouping Function
This is one of the functions provided by imageWARE Output Manager Select Edition V1.0. This
prohibits job interruption from other PC by performing group job transmission (by sending
multiple jobs in one cession).
Setting range
0: OFF (Connection Serialize Function is OFF)
1: ON (Connection Serialize Function is ON)
Standard value: 0
2C-CT-SW
Switch a setting for the color counter (only for the two-color mode).
Set whether to use full-color counter or mono-color counter for the two-color mode count-up.
2
Setting range
0: Perform count-up to mono-color counter.
1: Perform count-up to full-color counter.
Standard value: 1
Remarks
2-Color Print: 1 color from R, G, B, C, M, Y + Bk
Mono-color: 1 color only
DOM-ADD
Switch a setting of domain complement for email transmission.
Set whether or not to complement the domain information (ex.: @canon.co.jp) specified in the
user mode.
By setting 'canon@co.jp' to the domain in the user mode and set 1 for this mode, the address is
complemented to 'xxx@canon.co.jp' when performing the email transmission by just entering
'xxx'.
2
Setting range
0: Do not complement the domain information for the destination address.
1: Complement the domain information for the destination address.
Standard value: 0
N-MAILOF
Set whether or not to prohibit a new address for email.
Prohibit a new address for email. (Prohibit selection of a new address.)
2
Setting range
0: Do not prohibit a new address selection.
1: Prohibit a new address selection.
Standard value
1
COPIER > OPTION > USER
Subheading Contents
Level