Canon imagePRESS C1 Service Manual - page 629
Chapter 10
10-27
F-10-102
3) Remove three clamps [1], five faston terminals [2] and two connectors [3].
F-10-103
4) Remove the leakage breaker [1].
- 2 screws [2]
- 4 faston terminals [3]
F-10-104
10.5.8 DC/DC Converter PCB
10.5.8.1 Preparation for Removing RD-DC-DC PCB
0013-9617
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the rear upper cover. (page 10-14)Reference [Removing the
Rear Upper Cover]
2) Remove the rear lower cover. (page 10-14)Reference [Removing the
Rear Lower Cover]
3) Remove the DC power supply assembly. (page 10-22)Reference [Re-
moving the Power Supply Assembly]
10.5.8.2 Removing the RD-DC-DC PCB
0013-9618
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the RD-DC-DC PCB [1].
- 2 connectors [2]
- 4 screws [3]
F-10-105
10.5.9 High-Voltage Box Unit
10.5.9.1 Preparation for Removing the High-Voltage Box
Unit
0013-9984
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the decurler.
2) Remove the left upper cover. (page 10-12)Reference [Removing the
Left Upper Cover]
3) Remove the left middle cover. (page 10-13)Reference [Removing the
Left Middle Cover]
4) Open the toner replacement cover. (page 10-15)Reference [Toner Re-
placement Cover Opening]
10.5.9.2 Removing the High-Voltage Box Unit
0013-9985
imagePRESS C1 P / imagePRESS C1
1) Remove the hopper cover (left) [1].
- 1 screw [2]
F-10-106
2) Remove the left exhaust fan [1] with the duct.
- 1 connector [2]
- 1 screw [3]
[2]
[1]
[3]
[3]
[3]
[3]
[3]
[3]
[1]
[2]
[3]
[4]
[5]
[1]
[2]
[3]
[3]
[1]
[2]
[3]
[3]
[1]
[2]