Canon imagePRESS C1 Service Manual - page 898
Chapter 16
16-1
16.1 Outline
16.1.1 Construction of Service Mode
0011-9614
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
The Service Mode screen is divided into three layers; initial screen, large/middle items, and small items, as shown below.
Each screen provides a mode used for regular maintenance (Level 1 mode) and a mode used for troubleshooting (Level 2 mode).
F-16-1
The initial screen of this machine displays the function names shown below.
(1) COPIER: Service mode for the main unit
(2) FEEDER: Service mode for the document feeder
(3) SORTER: Service mode for the finisher
(4) FAX: Service mode for the fax
(5) BOARD: Service mode for the optional board
Each of COPIER, FEEDER, SORTER, and BOARD has seven large items as shown below.
F-16-2
Initial screen
(Level 1)
Main/intermediate
item screen
(Level 1)
Sub-item screen
(Level 1)
Sub-item screen
(Level 1)
User screen
Initial screen
(Level 2)
Reset key
Previous/next page
( )(2,8)( )
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
(Select an item.)
Main/intermediate
item screen
(Level 2)
Sub-item screen
(Level 2)
Sub-item screen
(Level 2)
Previous/next page
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
(Select an item.)
( )(2)
COPIER
FEEDER
SORTER
BOARD
DISPLAY
I/O
ADJUST
FUNCTION
OPTION
TEST
COUNTER
status indication mode
input/output indication mode
adjustment mode
operation/inspection mode
settings mode
test print mode
counter mode