Canon imagePRESS C1 Service Manual - page 881
Chapter 15
15-18
E805
Error in cooling fan of fixing belt
000E The edge/rear side cooling fan of fixing belt is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
000F The center/rear side cooling fan of fixing belt is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
0010 The center/front side cooling fan of fixing belt is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
0011 The edge/front side cooling fan of fixing belt is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Error in heat discharge fan of fixing assembly
0004 The heat discharge fan of fixing assembly is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Error in cooling fan of decurler
0005 The cooling fan of decurler is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Error in rear exhaust fan of the main body
0006 The rear fan of fixing assembly is unlocked.
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Error in upper exhaust fan of fixing assembly
0007 The upper fan of fixing assembly is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then turn on the main power.
Error in lower rear fan of fixing assembly
0014 The lower rear fan of fixing assembly is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Error in left exhaust fan
0015 The left exhaust fan of fixing assembly is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Error in lower front fan of fixing assembly
000A The lower front fan of fixing assembly is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Cooling fan 1 of delivery unit
000C The cooling fan 1 of delivery unit is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Cooling fan 2 of delivery unit
000D The cooling fan 2 of delivery unit is unlocked.
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Lower cooling fan
0012 The cooling fan of reversing unit is unlocked
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
Cooling fan of reversing unit
0013 The cooling fan of reversing unit is unlocked.
Turn off the main power, check power supply to the fan/replace
fan, and then, turn on the main power.
E820
Error in cleaning cooling fan of transfer unit
0002 Detects a fault of process unit fan
Turn off the main power, check the wiring of DC controller PCB,
check the fusing of 24V system, and then, turn on the main power.
0003 When ITB cleaning fan error is detected.
Turn off the main power, check the wiring of DC controller PCB,
check the fusing of 24V system, and then, turn on the main power.
E824
Error in detecting fault of primary charging suction/exhaust fan
0000 Detects fault of primary charging suction
Turn off the main power switch, check the wiring of DC controller
PCB, check the fusing of 24V system, and then, turn on the main
power switch
0001 Detects fault of primary charging exhaust fan
Turn off the main power switch, check the wiring of DC controller
PCB, check the fusing of 24V system, and then, turn on the main
power switch
0002 Primary exhaust assist fan is unlocked
Turn off the main power switch, check the wiring of DC controller
PCB, check the fusing of 24V system, and then, turn on the main
power switch
Code
Cause (Detection Description)
Remedy