Canon imagePRESS C1 Service Manual - page 526
Chapter 8
8-61
F-8-109
3) Remove the upper feed cover [1].
F-8-110
4) Pull out the feed roller [2] toward you.
- 1 resin ring [1]
F-8-111
8.10.5 Manual Feed Separation Roller
8.10.5.1 Preparation for Removing the Manual Separation
Roller
0013-9645
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the manual feed roller. (page 8-60)Reference [Removing the
Manual Feed Roller]
8.10.5.2 Removing the Manual Separation Roller
0013-9646
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) With lifting the paper guide, release the hooks [1], and then, release the
claws [2] to remove the paper guide (front) [3] and the paper guide (rear)
[4].
F-8-112
2) As in the step 1), remove the paper guide (center) [1].
MEMO:
As for removing/mounting the paper guide (center), it is easier to work by
pressing the separation roller shaft [2].
F-8-113
3) Pick up the tab [1] of the separation roller to remove the separation roller
[2] toward the rear side.
F-8-114
8.10.6 Horizontal Registration Assembly
8.10.6.1 Preparation for Removing the Horizontal
Registration
0020-8879
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1 (CUSTOM) / im-
agePRESS C1+ (Printer) / imagePRESS C1+
1) Open the front door.
2) Pull out the fixing/feeding unit toward you. (page 8-63)Reference [Pull-
ing/Removing the Fixing/Feeding Unit]
8.10.6.2 Removing the Horizontal Registration
0020-8877
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1 (CUSTOM) / im-
agePRESS C1+ (Printer) / imagePRESS C1+
1) Remove the lever [1].
- 1 screw [2]
[1]
[2]
[3]
[1]
[1]
[2]
[2]
[2]
[1]
[3]
[1]
[4]
[1]
[1]
[1]
[2]
[1]
[2]