Canon imagePRESS C1 Service Manual - page 1179
Chapter 16
16-282
3. CST
T-16-207
N-FAXOF
Set whether or not to prohibit a new address for FAX.
Prohibit a new address for FAX. (Prohibit selection of a new address.)
2
Setting range
0: Do not prohibit a new address selection.
1: Prohibit a new address selection.
Standard value: 1
N-IFAXOF
Set whether or not to prohibit a new address for iFAX.
Prohibit a new address for iFAX. (Prohibit selection of a new address.)
2
Setting range
0: Do not prohibit a new address selection.
1: Prohibit a new address selection.
Standard value: 1
N-FILEOF
Set whether or not to prohibit a new address for FILE.
Prohibit a new address for FILE. (Prohibit selection of a new address.)
2
Setting range
0: Do not prohibit a new address selection.
1: Prohibit a new address selection.
Standard value: 1
FINGM-SW
Set whether or not to display the fingerprint prevention button.
Set whether or not to display the button for fingerprint prevention function, in which fixing
operation is performed before an image is printed and then normal operation is performed in order
to prevent fingerprints in manual feeding.
2
Setting range
0: Do not display the button.
1: Display the button.
Standard value: 0
Remarks
Pressing the button increases fixing operation, and it extremely decreases printing performance.
CLR-TIM
Select the timing to perform a complete removal processing in the security kit.
When a complete removal processing is performed, job processing performance sometimes
decreases for certain data. This is because the page data which has been already processed is being
removed during job processing and it slows down the accessing process to CPU and HDD. If the
execution of this process is delayed so that the process is performed after the job is completed, the
job processing capability can be improved.
2
Setting range
0: Remove data during job processing.
1: Remove data after a job is completed.
Standard value: 0
FX-CLNLV
Change the level of the fixing roller cleaning which is controlled automatically.
2
Setting range: -5 to 5
Standard value: 0
COPIER > OPTION > CST
Subheading Contents
Level
U1-NAME to U4-NAME
Set ON/OFF of the paper name display when the paper size group (U1 to U4) is detected.
2
Setting range
0: Display "U1, U2, U3, U4" in the touch panel. (default)
1: Display the paper name specified in "CST-UI, U2, U3, U4" in the service mode.
Standard value: 0
In terms of specifying the universal size, generally, 'U1' to 'U4' is displayed on the touch panel
when U1/U2/U3/U4-NAME is '0'.
However, as an exception, if 'CST-U4' is registered as '18:LTR', 'LTR' is displayed on the touch
panel although 'U4-NAME' is '0'.
In other word,
1. U4-NAME: 0 / CST-U4: 29 size is indicated as 'U4' / paper size is Argentine LTR.
2. U4-NAME: 1 / CST-U4: 29 size is indicated as 'LTR / paper size is Argentine LTR.
3. U4-NAME: 0 / CST-U4: 18 size is indicated as 'LTR / paper size is LTR.
4. U4-NAME: 1 / CST-U4: 18 size is indicated as 'LTR / paper size is LTR.
COPIER > OPTION > USER
Subheading Contents
Level