Canon imagePRESS C1 Service Manual - page 637
Chapter 10
10-35
F-10-148
6) Remove nine clamps [1].
F-10-149
7) Remove the side driver PCB [1].
- 17 connectors [2]
- 5 screws [3]
- 1 PCB support [4]
F-10-150
10.5.20 Backside Driver Cover
10.5.20.1 Preparation for Removing the Backside Driver
PCB
0013-9401
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the left rear upper cover. (page 10-13)Reference [Removing
the Left Rear Upper Cover]
2) Remove the rear upper cover. (page 10-14)Reference [Removing the
Rear Upper Cover]
3) Remove the controller box.
10.5.20.2 Removing the Backside Driver PCB
0013-9402
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the backside driver PCB [1].
- 10 connectors [2]
- 5 screws [3]
F-10-151
10.5.21 Primary Suction Fan
10.5.21.1 Removing the Air Filter
0014-0337
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the right upper cover.
F-10-152
2) Remove the filter cover [1].
- 1 screw [2]
F-10-153
3) Remove the air filter [1].
[1]
[2]
[2]
[2]
[2]
[1]
[1]
[1]
[1]
[2]
[2]
[2]
[2]
[2]
[3]
[3]
[4]
[2]
[2]
[3]
[1]
[2]
[3]
[3]
[2]
[1]
[3]
[3]
[3]
[2]
[2]
[2]
[3]
[3]
[2]
[1]
[2]
[1]
[2]