Canon imagePRESS C1 Service Manual - page 1255
Chapter 17
17-30
[6] -> [0]: initialize / other than [0]: go back to Menu screen
After execution, a message will appear asking you to turn off and then on the power.
F-17-63
5) Turn off the main power switch, remove the USB memory, and turn on the main power switch.
[7]: Clear downloaded files
Use it to remove the system software files that have been saved in the temporary storage area of the HDD. Use it if you want to remove the files without writing
them to the HDD after downloading (menu [2] and [3]).
1) The power supply is turned off after the download of the system software by menu [2] or [3] is completed, and it starts in a safe mode with the USB memory
connected.
2) Go through the instructions on the control panel, and press an appropriate key.
[7] -> [0]: execute / other than [0]: go back to Menu screen
Upon execution, the Menu screen will return.
F-17-64
[Stop]: Shutdown (in normal mode only)
Use it to start up the shut-down sequence.
1) Go through the instructions on the control panel, and press an appropriate key.
[Stop] -> [0]: execute / other than [0]: go to Menu screen
The shut-down sequence will be executed, and a message will appear asking you to turn off the power.