Canon imagePRESS C1 Service Manual - page 1244
Chapter 17
17-19
F-17-35
If the machine is in safe mode,
5-1) Click [Start Shutdown] so that the machine starts the shut-down sequence.
6) When the machine starts up, it will write the system software to its HDD and flash ROM while showing the progress of writing on the control panel screen. When
done, it will indicate a message asking you to turn off and then back on the power. In response, turn off and then back on the main power.
Turning Off the Power
Do not turn off the machine's power while downloading or writing is under way; otherwise, the machine may fail to start up. If such is the case, execute HDD
formatting, and download the system software once again.
MEMO:
You can remove the downloaded system software before it is written to the HDD or flash ROM. To do so, go through the following before restarting the machine:
1) Click [Clear] [1].
F-17-36
2) Click [Execute Clear] so that the system software that has been stored in the temporary storage area of the HDD will be removed.
F-17-37
3) Click [OK]. Return to the previous page.
F-17-38
MEMO:
After connecting, the following device information [1] is displayed on the right upper area of the SST screen.
- IP address
- Product name
- Download mode
Message
Follow the instructions shown on the machine
for shutdown process.
Click [OK] button to return to Main Menu.
O K
SelectableFirmware
SelectableFir mware
Control
172.16.1.100
iPR_C1
NORMAL
SYSTEM
Firmware Version
Active
USenXXXXn
Hold
USenXXXXi
RCON
XXxxXXXX
DCON
XXxxXXXX
MEAPCONT
XXxxXXXX
BOOTROM
XXxxXXXXC
RUI
XXjaXXXX
XXenXXXX
LANGUAGE
XXjaXXXX
XXenXXXX
D ow n l o a d i n g c o m p l e t e
ServiceSupportTool DLM10 (Ver.3.22E)
C l e a r
C l i c k t h e b u t t o n o f t h e t a s k t o b e
exe c u t e d .
Download Firmware
Upload Data
Download Data
Restore Backup System
Format HDD
Return to Main Menu
Shutdown
O K
[1]
BOOT
iPR_C1
BROWSER
DCON
HDFormat
iRCXXXX
KEY
G3FAX
HELP
LANGUAGE
MEAPCONT
MEDIA
RCON
RUI
TTS
WebDAV
SYSTEM
TSTMP
Message
Execute Clear
Cancel
Do you want to clear whole firmware
downloaded to the machine?
Message
The downloaded firmware has been deleted.
O K