Canon imagePRESS C1 Service Manual - page 912
Chapter 16
16-15
11.MISC
T-16-16
12.ALARM-1
T-16-17
13.ALARM-2
F-16-12
T-16-18
COPIER>DISPLAY>MISC
Subheading
Contents
Level
ENV-TR
Environmental area
Display the environmental area for transfer control based on the environment (temperature,
humidity) in the printer.
1
Setting value
1: Low humidity (5.8g or less)
2: Normal humidity (5.9g to 17.3g)
3: High humidity (17.4g or more)
PP-S-REF
REF value of the paper thickness detection sensor
Display the REF value of the paper thickness detection sensor at idling condition.
Automatically measure and display the distance to the registration roller before the standby status
after the power is turned on, and before the standby status after the job is completed.
Setting range: 0 to 1023 (100 to 900 in a normal condition)
1
PP-S-DAT
Paper thickness of the paper thickness detection sensor
Display the thickness of the paper which last passed. (Unit: µm)
Display range: 0 to 999
1
LPOWER
Real-time display of the laser volume
Setting range: 00 to FF (hex)
2
COPIER>DISPLAY>ALARM-1
Subheading
Contents
Level
IMG-DT-Y/M/C/K
Average value of the image ratio created in Y/M/C/K color
1
LST-DY-Y/M/C/K
Image Duty Y/M/C/K color last output
Display the image duty of the image last output.
Display range: 0 to 100%
2
Item
Description
No.
Indicates the order of occurrence of alarms (1 to 50; the highest number indicating the oldest)
DATE
Indicates the date of occurrence of alarms
TIME1
Indicates the time of occurrence of alarms
TIME2
Indicates the time of occurrence of alarms
CODE
Indicates the location f occurrence of alarms
DTL
Indicates alarm codes.
CNTR
Indicates the reading of the total counter at time of alarm.