Canon imagePRESS C1 Service Manual - page 225
Manual is about: imagePRESS C1 Series
of
1265
Chapter 2
2-131
F-2-472
13) Remove the 2 screws [2] of the hopper cover (upper) [1] to slide it.
F-2-473
14) After four places of claw [1] are matched, printer upper cover [2] is installed.
- 4 screws (RS tightening; M4X8) [2]
F-2-474
15) Secure the toner replacement cover [1] in place.
- 2 screws [2] (use the screws removed in step 13)
F-2-475
16) Close the toner replacement cover.
17) Mount the reader unit rear cover [1].
- 5 screws (RS tightening; M4X8) [2]
[1]
[1]
[2]
[2]
[1]
[3]
[3]
[1]
[2]