Canon imagePRESS C1 Service Manual - page 161
Manual is about: imagePRESS C1 Series
of
1265
Chapter 2
2-67
F-2-215
3) Remove the protection tape [1].
F-2-216
4) Attach the replenishment labels [1] and [2] along the edge of screw hole
[A] and the side of plate [B].
F-2-217
5) Hold the new toner container as shown, and shake it about 10 times as if
to rotate it.
F-2-218
6) Hold the grip, and insert the toner container [1] fully inside.
F-2-219
7) Turn the tab [1] on the toner container to lock in place.
F-2-220
8) Repeat the foregoing steps for all colors.
9) Close the toner replacement cover.
[1]
[1]
[2]
[1]
[1]
[2]
[B]
[A]
[A]
When executing the step 5) and 6), be careful not to touch the shutter [1]
found at the bottom of the toner container.
Be sure to turn the tab until it is in the Lock position.
[1]
[1]
[1]