Canon imagePRESS C1 Service Manual - page 316
Manual is about: imagePRESS C1 Series
of
1265
Chapter 5
5-37
F-5-170
4) Remove the ADF open/close sensor [1].
- 1 connector [2]
F-5-171
5.4.10.2 Removing the ADF Open/Close
Sensor(imagePRESS C7000 Series)
0016-9500
Color Image Reader-H1
1) In the case of the copyboard cover, detach the upper rear face plate 1 [1].
- 1 screw [2]
F-5-172
2) Detach the upper rear face cover 3 [1].
- 2 screws [1]
F-5-173
- 1 screw [1]
F-5-174
3) Detach the top rear cover [1] of the sub station and remove the filter [2].
- 6 screws [3]
F-5-175
4) Detach the connector base [1].
- 2 screws [2]
[2]
[1]
[2]
[1]
[1]
[2]
When tightening the 2 screws at the top surface, be sure to tighten them
while pressing the upper rear cover in the direction of the arrow.
[1]
[1]
[3]
[1]
[3]
[3]
[2]
[3]