Canon imagePRESS C1 Service Manual - page 173
Chapter 2
2-79
F-2-276
23) Open the decurler front cover [1].
F-2-277
24) Attach the hopper cover (Left) [1].
- 1 screw [2]
F-2-278
25) Close the decurler front cover.
26) Close the toner replacement cover.
27) With releasing the lock [1] of the shutter lever in the direction of the ar-
row, push the shutter lever [2].
F-2-279
28) Attach the cover [1] of the process unit.
- 4 screws [2]
F-2-280
29) Close the front door.
2.2.45 Other Works
0014-3000
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1. Service Book Case
1) Attach the service book case to the lower right cover of the host machine.
2. Touch Pen
1) Place the touch pen [1] on the position shown in the figure.
F-2-281
3. Shutdown Label
1) Attach the shutdown label [1] in appropriate language to the upper rear
right cover.
[2]
[1]
[1]
[1]
[2]
[1]
[2]
MEMO:
- Attach the case at which it does not disturb the opening/closing the lower
right cover.
- In case of installing the paper deck, mount it to the right cover of the deck.
[1]
[2]
[1]