Canon imagePRESS C1 Service Manual - page 162
Chapter 2
2-68
2.2.32 Setting the Toner Container
0021-4254
imagePRESS C1+ (Printer)
1) Take out the toner container from its package that comes with the ma-
chine.
2) Open the toner replacement cover [1].
F-2-221
3) Remove the protection tape [1].
F-2-222
4) Hold the new toner container as shown, and shake it about 10 times as if
to rotate it.
F-2-223
5) Hold the grip, and insert the toner container [1] fully inside.
F-2-224
6) Turn the tab [1] on the toner container to lock in place.
F-2-225
7) Repeat the foregoing steps for all colors.
8) Close the toner replacement cover.
2.2.33 Supplying Toner
0012-7685
imagePRESS C1 P / imagePRESS C1
1) Select (Supply Toner: FUNCTION>INSTALL>SPLY-H-4) from the
service mode, press [OK] key (approx. 2 min).
When executing the step 5) and 6), be careful not to touch the shutter [1]
found at the bottom of the toner container.
[1]
[1]
[1]
Be sure to turn the tab until it is in the Lock position.
MEMO:
Do the following steps after the host machine is in standby status.
Be sure not to turn the power switch off during the operation.
[1]
[1]