Canon imagePRESS C1 Service Manual - page 183
Chapter 2
2-89
F-2-336
35) Remove the 3 mirror retaining screws [1].
F-2-337
36) Attach the sub station left upper cover.
37) Attach the sub station upper right cover.
38) Attach the sub station upper front cover.
39) Close the sub station front right cover and sub station front left cover.
40) Detach the power unit station rear cover 1 [1].
- 8 screws [2]
F-2-338
41) Detach the main controller cover 2 [1].
- 10 screws [2]
F-2-339
42) Detach the controller PCB guide [1].
- 4 screws [2]
F-2-340
43) Detach the S-B board [1].
- 2 screws [2]
Make sure to store the 3 mirror fixing screws [1] surely because they are
required when carrying.
MEMO:
When attaching the Platen cover, attach the Platen cover upper right cover
to improve the operation efficiency.
(See the installation procedure for the Platen cover.)
[1]
[2]
[1]
[1]
[2]
[2]
[1]
[2]
[2]
[2]
[2]
[2]
[2]
[2]
[1]