Canon imagePRESS C1 Service Manual - page 1057
Chapter 16
16-160
CNTR-DSP
Select the screen display according to the external controller.
1
Setting range
0: Display the external controller icon in the control panel of the copier main unit. (setting when
the color image server is connected)
1: Do not display the control panel of the copier main unit. (setting when the external controller
with an control panel is connected)
Standard value
0
BASE-SW
Make a setting to switch the setting from the MEAP-full model to the Base model.
Make a setting to switch the device which operated as a full model back to the base model.
1
Use it when trouble attributable to MEAP application occurs. By setting to '0', the operation of
MEAP application can be controlled.
settings
0: off (base model); 1: on (full model) [Default]
MEMO:
The change only from '1' to '0' is possible.
SC-L-CNT
Use it to set the threshold for identifying large size paper for the scan counter.
1
Settings
0: Count the paper larger than B4 as large size. (A paper that is B4 or smaller is considered as
small size.) [Default]
1: Count the paper larger than LTR as large size. (A paper that is LTR or smaller is considered as
small size.)
The scan counter threshold at copy is determined as follow depending on the combination with
the setting value of B4-L-CNT (COPIER > OPTION > USER > B4-L-CNT):
Count the paper larger than B4 as large size. (A paper that is B4 or smaller is considered as small
size.)
Count the paper that is B4 or larger as large size. (A paper smaller than B4 is considered as small
size.)
Count the paper larger than LTR as large size. (A paper that is LTR or smaller is considered as
small size.)
REPORT-Z
Make a setting to switch the attribute flag attached when printing a report.
1
Setting range
0: For PDL character mode
1: For PDL photo mode
2: For SCAN character mode
3: For SCAN photo mode
Standard value
0
IFXEML-Z
Make a setting to switch the attribute flag attached to the color iFAX and reception mail printing.
1
Setting range
0: For PDL character mode
1: For PDL photo mode
2: For SCAN character mode
3: For SCAN photo mode
Standard value
0
COPIER>OPTION>BODY
Subheading Contents
Level