Canon imagePRESS C1 Service Manual - page 190
Chapter 2
2-96
F-2-366
2.9.3 Checking the Contents
0021-2145
imagePRESS C1+ (Printer)
F-2-367
2.9.4 Installing the Document Tray
0013-7488
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Remove the 2 rubber caps [1].
F-2-368
2) Mount the 2 washers [1] and the 2 stepped screws [2] on the upper right
cover of the host machine.
F-2-369
3) Fit the notches [2] of the reinforcement plate of the Document Tray [1]
into the stepped screws [3].
F-2-370
2.10 Installing the Platen Cover
2.10.1 Checking the Contents
0013-6441
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
[1]
Document Tray
1 pc.
[2]
Washer
2 pc.
[3]
Stepped screw
2 pc.
[4]*
Stepped screw (M4)
2 pc.
[5]*
Stepped screw (M4X10.8)
2 pc.
* Not used in this host machine.
[1]
Document Tray
1 pc.
[2]
Washer
2 pc.
[3]
Stepped screw
2 pc.
[4]*
Stepped screw (M4)
2 pc.
* Not used in this host machine.
[1]
[3]
[2]
[4]
[5]
[1]
[3]
[2]
[4]
When attaching the stepped screw, if the stepped screw is fully tightened,
there is no space left for the Document Tray to be attached. Be sure to secure
a certain space while maintaining the stability of the Document Tray.
[1]
[1]
[2]
[1]
[2]
[2]
[2]
[1]
[3]