Canon imagePRESS C1 Service Manual - page 330
Chapter 5
5-51
F-5-260
3) Insert the pin of the mirror positioning tool (front [2], rear [3]) into each
hole [1] of the primary mirror base and the secondary mirror base.
F-5-261
F-5-262
4) Fix the ends of the wire (temporarily fixed to the reader frame) with the
spring.
5) Fully tighten the screw on the rear and the front wire mount.
6) Remove the mirror positioning tool (front, rear).
7) Assemble the mirror mounts by the reverse procedure to disassemble
them.
5.4.13.6 Points to Note When Attaching the Control Panel
(imagePRESS C1 Series)
0014-2026
imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+
Points to Note When Attaching the Control Panel Arm Unit
- Be sure to fit the screws in order. Hook the claw [2] of the control panel
arm unit [1] and then fit the 4 screws [3], and then the 4 screws [4].
- Be sure not to drop the screws.
F-5-263
[A]
[B]
[C]
[B]
[A]
[1]
[3]
[2]
[1]
[3]
[3]
[4]
[4]
[2]