Canon imagePRESS C1 Service Manual - page 605
Chapter 10
10-3
10.2.2 Count increment timing
0014-3730
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
The count increment timing differs according to whether printing is single sided or duplex and whether there is a finisher mounted.
1. Single sided print, duplex second page
Count increment for single sided print and the second page of duplex print takes place when the following sensors detect that the trailing edge of the paper has
exited the device.
T-10-2
2. Duplex first page
The count is incremented when, with the duplex left sensor (PS19) ON, the printing of the first page of the duplex print is judged finished.
10.3 Fans
10.3.1 Fan
0014-1313
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
The fan configuration and the wind direction are shown in the following figure.
Name and function of each fan are shown in the following table.
COPIER > OPTION > USER > COUNTER1 to 6
(For details, refer to the above item in the Service Mode section.)
Settings can be changed for other counter modes in service mode. (In 120/ 130V models, all counter settings can be changed.)
Middle order (printer assembly)
*1:F14-6211
*2:F14-6231
*3:F14-6241
*4:F14-6291
*5:F14-6261
Conditions
Sensor
No finisher
Paper exit sensor (PS15)
With finisher
Finisher paper exit sensor