Canon imagePRESS C1 Service Manual - page 447
Manual is about: imagePRESS C1 Series
of
1265
Chapter 7
7-98
F-7-189
6) Remove 40 connectors.
F-7-190
7) Remove the main body rear exhaust fan duct [1].
- 1 connector [2]
- 1 screw [3]
F-7-191
8) Move the DC controller box [1] to the left and remove it.
- 6 screws [2]
F-7-192
9) Remove the flywheel.
- 2 screws [2]
F-7-193
10) Remove the tensioner [1].
- 1 spring [2]
- 1 screw [3]
F-7-194
Points to Note When Mounting the Tensioner
In the case of mounting the tensioner, mount it with the spring [2] first, and
then with the screw [3].
11) Remove the timing belt [1].
F-7-195
12) Remove the 8 clamps [1], disconnect the connector [2], and remove the
edge saddle [3].
[1]
[1]
[1]
[1]
[1]
[3]
[2]
[2]
[2]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[1]